Conserve Energy, switch to LED Lights

Comtec Energy is equally considerate in conservation of energy and to advocate in deploying low power consuming devices, the street lights form one major consumer sector of dear electricity, pole mounted DC types solar installations are not very successful because of our tough environmental conditions of dust and high ambient temperatures, thoughtfully we are promoting AC type LED street lights primarily which are more suitable in most of the cases, however we offer DC type LED street lights as well.

Comtec Energy LED Street Lights are Made in Pakistan with strict quality controls, each product is run for 48 hours under “burn test” conditions. There are few makes and models in the market which can compete our quality in an “apple to apple” comparison. Energy efficiency and longevity of LED street lights are two forceful convincing factors for new installations as well as in replacements, the life span of our LED street lights is more than 50,000 hours (15+ years). Technically, the colour rendering ability of LED street lights in reproducing the colours of the objects under light also make it a good choice if compared to other types of street lights. There are various other advantages of deploying LED street lights in addition to its economic benefits and conservation of energy.

Current Models of LED Street Lights

1. CEL-50A (Gen 1) – 50W LED Street Light (AC model)
2. CEL-50A (Gen 2) – 50W LED Street Light (AC model)
3. CEL-32A (Gen 2) – 32W LED Street Light (AC model)
4. CEL-100A (Gen 2) – 100W LED Street Light (AC model)
5. CEL-80A (Gen 2) – 80W LED Street Light (AC model)
6. CEL-32D (Gen 2) – 32W LED Street Light (DC model)
7. CEL-65D (Gen 2) – 65W LED Street Light (DC model)
8. CEL-96D (Gen 2) – 96W LED Street Light (DC model)

Primary Features for all LED Street Lights (AC & DC Types)

  • Power Supply is Weather Proof, total Encapsulation with heat conductive silicone rubber, good heat conduction out of the supply.
  • Power Factor – Greater than 0.95
  • Power Supply Serviceability – Power Supply is removable without having to remove the light from the pole.
  • LED Type – SMT only, SMT LEDs allow for automated assembly and best heat transfer, resulting in maximum product life and reliability.
  • LED Arrangement – Series and Parallel – Such and arrangement results in maximum redundancy. Since the power supply is constant current, failure of individual LEDs results in no reduction of brightness, as the surrounding parallel LEDs simply get brighter as total current flow is constant.
  • LED Optical Modules – Sealed for the life of the light. The optical modules need to be sealed to prevent, dust and insects form entering and collecting inside them. This would result in degradation of the LEDs and premature light reduction.
  • Light Fixture Construction – Pure Extruded Aluminum. Extruded Aluminum is stronger and more corrosion resistant than die-cast Aluminum.
  • LED Heat removal – High Efficiency Extruded Aluminum Heat Sink. Heat Conduction of extruded Aluminum is much superior to die-cast Aluminum.
  • Aluminum Pre-Treatment – 4 step pre-treatment followed by Anodizing or Powder Coating. Aluminum has to be properly pre-treated for good anodizing or powder coating results.

Document TypeParticularsDownload Link
DatasheetCEL-50A (Gen 1) : 50W AC type LED Street LightHere
DatasheetCEL-50A (Gen 2) : 50W AC type LED Street LightHere
DatasheetCEL-65D (Gen 2) : 65W DC type LED Street LightHere
DatasheetCEL-80A (Gen 1) : 80W AC type LED Street LightHere